Clear DTC, Live data stream, vehicle information read... Supports all 10 test modes of the OBDII. OBDII Data Stream Graphic Display. Display DTC help information and service information. Oxygen sensor test, carbon canister test.Cover more than 46+ car brand in American car. 1999 and newer, Europe car after 2003 and newer ; Asian car. Can test Engine, Transmission, ABS and SRS systems.
Service light reset function for multiple car models. The scan tool LAUNCH CRP123 can read/erase codes and view live data in the engine system to help you easily determine. The cause of the warning light, and troubleshoot the issues, checking the engine real-time operating status, and turning off. Warning light to make sure the engine works properly.
The OBD2 scanner reads and clears codes and views live data in transmission systems, and helps make adjustment to keep. The transmission system's output optimally adapted to the speed and load. Knowing the exact cause of a transmission's woes. Means you can get it repaired as quickly as possible and at minimal expense to you.
For ABS (Anti-lock Braking System). With this code reader, you can access the ABS reading and clearing DTCs and viewing real-time data flow in the system. Also supports performing various bi-directional tests to check the operating conditions of Anti-lock Braking System, and turn.
For SRS (Air-bag) System diagnostic. Read and clear fault code in SRS (Air-bag) and turn off warning light of air-bag for making sure engine work properly and safely. This scan tool allows you to read codes, clear codes, and read live data in Supplementary Restraint System (air-bag) to ensure. Live Data on Graph(in graphic format). Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. Show the detailed description of the Diagnostic Trouble Code (DTCs). Turns off Check Engine Light (MIL), clears codes and resets monitors.
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer. Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Retrieves and displays test results for emission-related powertrain components and systems. Besides, it comes with the added benefits of reading data streaming for four systems and vehicle diagnostic reporting.Amercian Area: (1996 and newer). For USA FORD Group(For Ford Lincoln Mustang). For GM Group(for GMC Chevrolet Buick Cadillac). For CHRYSLER Group(for Chrysler Jeep Cherokee). European Area: (2002 and newer). For BENZ, For BMW, For VW. For OPEL, For VOLVO, For FIAT. For LANDROVER, For PORSCHE, For SEAT. For SKODA, For AUDI, For JAGUAR. For SAAB, For SMART, For ALFA. For VW_CV, For EU Ford, For Peugeot.
For Citroen, For RENAULT, For DACIA. Asian Area: (2005 and newer). For SUZUKI, For ACURA, For HONDA.
For MITSUBISHI, For NISSAN, For TOYOTA. For MAZDA, For HYUNDAI, For KIA. For SUBARU, For INFINITI, For LEXUS. For ISUZU, For Daewoo, For HOLDEN.
If not sure, please leave message to ask: system + car model + release year. How to update Ancel FX2000? Here's the upgrade guide via USB cable following. Step 1: Please connect the device to a computer via the USB cable. Step 2: Download the latest update software from ANCEL official website and install it on your computer.
The "Product Serial Number" will be read automatically. Here's the upgrade guide via TF card following.
Step 1: Please make sure the network is good before the update. Network quality will also affect the update process. Step 2: Move out the TF card from the device and insert it into the reader, then plug into the computer port, must make sure that the computer successfully recognizes the TF card, then try to update the device again.
Why does it display No mobile device was found. Please insert TF card to the device. The message means that the computer does not recognize the TF card in the device.Connect the device to a computer via the USB cable. Please note that there will be a 5-second countdown on the device's screen to indicate if you want to check for a new version. Simply press OK and then start the update.
Supports lifetime free software updates to fix the latest bugs and add new parameters to improve its capabilities and performance. After diagnosis, the user can print the DTC data via the software tool and save it for future analysis.
Simply download the software from the ANCEL website. Supports operating systems WIN XP, 7, 8, 10.
Display: Backlit, 480272 TFT color display. Working temperature:0 to 60'C (320 to 140'F). Storage Temperature: -20 to 70'C (-4 to 158'F). External Power: 8-18 Volts powered by vehicle battery.
In transmit for the hot season is coming. Please kindly be patiently wait for your order. This will help your product to be received safely and quickly! And we are not responsible for order's delay or miss because of your incomplete contact information. 2 months for the accessories.For free return and replacement. If item arrive defect or doesn't suitable for your ca. If after 30 days, or the item has been used, we have the right to decline your claim. We have been engaged for many years in the line of automobile diagnosing instruments and our corporation is established for the purpose of trustworthiness. We have over 4 warehouses that are located in US.
We is mainly deals in various types of professional car diagnostics scanners and other car service maintenance tools. Such as OBDII SCANNER, ODO-METER TOOL / KEY PRO-GRAMMER, SMOKE DETECTOR / PROBE CIRCUIT TESTER /BATTERY TESTER.....
Suitable for COMMERCIAL VEHICLES / PASSENGER CAR /MOTORCYCLE / ATV / UTV etc. Customer Service Hours: M-F: 9:30AM - 18:00PM BST (Beijing Standard Time).