Automotive OBD2 Diagnostic Scan Tool SRS ABS Oil Reset Check Engine INNOVA 6100P. The all-new 6100p is the perfect entry-level tool designed to empower any consumer or technician when it comes to vehicle maintenance and repair. This code reader works on all 1996 and newer OBD2 cars, light trucks, SUV's, hybrids, and minivans. The 6100 Plus OBD II codes reader shows fault codes with DTC Severity and quickly reveals the cause of "Check Engine" light warnings(MIL). One-press hotkey to turn off check engine light after vehicle maintenance.
Freeze Frame displays plenty of vehicle data present when the code was set off, such as engine coolant temperature, fuel injector pulse width(fuel trim), RPM, spark timing, etc. In addition to emission-related OBDII codes, the abs srs scanner works well on reading/erasing ABS and SRS codes. The professional mechanic obdii diagnostic code reader tool can be used to check the performance of the battery or alternator for your hybrid, car, SUV, minivan, or light truck diesel as well. The Oil Reset feature provides step-by-step reset procedures after an oil change for most 1996 and newer OBD2 vehicles. The free stepwise guide which 6100 Plus scan tool provides as regards oil change reset and drive cycle procedures may be a major relieve for beginners.
The 6100 Plus designed and developed in the US and supported by unmatched technical assistance from a staff of all ASE certified technicians. Battery/Alternator Test: Innova 6100P Innova OBDII scanner provides battery & alternator tests to check the performance of a vehicle's charging system.It does so by checking if the batteries and alternators are in line with voltage specs recommended for the vehicle. ABS System: Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this scanner does for you. SRS System: SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic device can detect every electronic parameter to check its health status. Oil Lamp Reset Service: allows you to perform reset for a new calculation of the Engine Oil Life system once changed the oil.
All 10 modes of OBDII test. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs). Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability. LED Lights Display More Intuitive. Green LED: Indicates that all engine systems are running normally all monitors on the vehicle are active and performing their diagnostic testing, and no DTCs are present.
Yellow LED: Indicates there is a possible problem. A "Pending" DTC is present and/or some of the vehicle's emission monitors have not run their diagnostic testing. Red LED: Indicates there is a problem in one or more of the vehicle's systems. By accessing to ABS system, and retrieving the fault codes, this INNOVA 6100P abs scanner can troubleshoot the ABS issue with a visual inspection of all brake components that caused the warning light, and fixed the problem after repair, This can diagnoses ABS system codes work on most US vehicles after1996. By detecting every electronic parameters in SRS system to check their health status, this diagnostic tool can address the SRS potential issues timely to ensure your driving safety, and and fixed the problem after repair, This can diagnoses SRS system codes work on most US vehicles after1996.
INNOVA 6100P obd2 scanner provides battery & alternator tests to check the performance of a vehicle's charging system. When troubleshooting a no start/hard start condition, carrying out this test really helps in knowing where to look, hence saving time.
The 6100P car code reader makes this process effortless by equipping the user with a guide to oil light reset procedures for most 1996 and newer cars made for the US market. Resetting that oil light gauge is something that you can do on your own and the Innova 6100P maintenance light reset tool walks you through every step making sure that it is properly done. Code Severity Alert: By reading codes, quickly identify if your vehicle needs an immediate fix or if it can wait you get home to fix it yourself. LED Indicators Alert: There are three LED indicators on the code reader: Green LED: your vehicle is in good condition.
Yellow LED: you need to fix the issue and clear codes. Red LED: your vehicle has serious problems, you may not pass the test if these problems could not be fixed. See key information about your vehicle in real time e. The scan tool shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter. Besides, the data logging feature allow you to record the live data and check them later or show to the mechanic.
Repair Solutions 2, Fix the Problem. Download for free(App store & Google Play) and pair with your Innova tool for access to the most comprehensive automotive repair database with verified fixes from ASE Master Technicians. Repair Solutions 2 to Inspect. Get the most out of your Innova 6100P car scanner. Packed with professional-grade features and benefits, Innova new range of tools come with Bluetooth and WIFI technology and pair seamlessly with the all-new RepairSolutions2 diagnostic app.1 6100P Code Reader with Diagnostic Cable. Notice: Plastic Case and AAA Battery not included.
16Pin OBD2 Plug & Bluetooth. Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, User Friendly.
ABS & SRS & Transmission. Oil Light Reset+Oil Level/Oil Life Status. Battery Test & Alternator Test. Fit for Ford, Fit for Chevy, Fit for Dodge..
Fit for GM, Fit for Toyota, Fit for BMW, Fit for BENZ.