Supports data recording and playing back. Provides lifetime free online update service. View Live Data Graphing of Engine/AT/Airbag/ABS System.4 Live Data Stream Analyse in 1 Graph. This OBDII code reader has big size LCD color screen. It also shows live vehicle sensors data in text, multiple graph format shows 4 live Readiness and allows you to focus on any suspicious or symptom-specific data parameters. Of Engine & AT & Airbag & ABS System. Can read/erase codes and view live data in the engine system to help you easily determine the cause of the warning light, and troubleshoot the issues, checking the engine real-time operating status, and turning off warning light to make sure the engine works properly.
The OBD2 scanner reads and clears codes and views live data in transmission systems, and helps make adjustment to keep the transmission system's output optimally adapted to the speed and load. Knowing the exact cause of a transmission's woes means you can get it repaired as quickly as possible and at minimal expense to you. For AB (Anti-lock Braking System). With this code reader, you can access the ABS reading and clearing DTCs and viewing real-time data flow in the system.
It also supports performing various bi-directional tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light. Read and clear fault code in SRS (Airbag) and turn off warning light of airbag for making sure engine work properly and safely. This scan tool allows you to read codes, clear codes, and read live data in Supplementary Restraint System (airbag) to ensure it works fine. The LAUNCH code reader Creader VII+ is an enhanced scan tool specially designed for most 1996 and newer OBDII-compliant vehicles. Compared to basic OBD2 scanner/code readers, it provides complete OBDII diagnostics, including.
Show the detailed description of the Diagnostic Trouble Code (DTC) and clear/reset the diagnostic information. Turn-off Malfunction Indicator Light (MIL). Show whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Show the information of continuous data stream from vehicle in live graphic (waveform) display. Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. Show the last results of O2 sensor test in graphic display for troubleshooting.
Read the results of on-board diagnostic monitoring tests for specific components/systems. Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. For Fuel Tank System (Carbon canister test).For Suzuki, for Honda, for Mitsubishi, For Nissan, For Toyota, for Mazda, for Hyundai, for KIA, for Subaru, for Infiniti, for lexus, for Acura, for ISUZU. For Ford, for GM, for Chrysler. For Benz, for BMW, for VW, for Opel, for Volvo, for Fiat, for LandRover, for Seat, for Skoda, for Audi, for Porsche, for SAAB, for Jaguar, for Euro Ford, for Romeo. How to Register and Update This Scan Tool? There are two methods to update the device: Update via TF card (strongly recommended) or update via USB cable. Download and install the Creader VII+ updating tool and launch the program when installed. Note: the "User password" is equal to the Register Code. Install the TF card from the tool into the supplied USB TF card adapter and insert into the USB port of the computer. Once all steps are complete, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt you to upgrade, select OK button on tool to proceed.
Screen: 2.4 TFT 320240 dpi. Dimension: 120mm75mm20 mm (4.7" 3.0" 0.8). Otherwise an Unpaid Item case will be opened to you.
Please make sure it's correct and include. 12 months free repair for the devices.3 months for the accessories. If after 30 days, or the item has been used, we have the right to decline your claim. We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 5 years.
We are authorized first class distributor of Launch and Autel brands. Our customer-oriented service strives for positive feedbacks.Business time: GMT8 (9:00-18:00) from Monday to Friday.