Icarsoft Multi System Diagnostic Scan Tool Professional Us V2.0 For Ford Au

  

PROFESSIONAL MULTI-SYSTEM AUTO DIAGNOSTIC TOOL US V2.0. FOR FORD (US FORD, EU FORD AND AU FORD)/ GM / CHRYSLER /. JEEP / HOLDEN +OIL RESET +EPB+BMS+DPF+SAS+ETC+OBDII. ICarsoft US V2.0 is a Professional and powerful vehicle fault diagnosis tool for Ford/ GM/ Holden developed by iCarsoft Technology Inc.

With a 4.0 TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems. UP BUTTON--Moves cursor up for selection. LEFT BUTTON--Moves cursor up for selection. RIGHT BUTTON--Moves cursor down for selection. DOWN BUTTON--Moves cursor down for seiection. ENTER BUTTON--Confirms a selection(or action). HELP BUTTON--Shows help information for test. F1 FUNCTION BUTTON--In case of special use. F2 FUNCTION BUTTON--In case of special use.

OBDII CONNECTOR--Connects the scan tool to. The vehicle's Data Link Connector via OBDII Cable. STORAGE CARD SLOT--Holds the system of the.

Data Cable CONNECTOR--Connects the scan tool. For power supply and update the software if needed. ICarsoft US V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine. Transmission, ABS and airbag etc. Support OBDII/EOBD Ten Modes of Operation 3.

Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC 6. Easy To Use With Silicone Keys 7. Oil Light/Service Reset: Support service lamp reset. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for. Battery Management System (BMS), registers new battery to the BMS while battery replacement.

Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process. While DPF blockage and turn off the DPF indicator. Electronic Throttle Control systems (ETC) relearn the throttle valve control value while clear or replace.

SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or. Recalibrates SAS while steering part replacement.

The Print Data function allows you printing out diagnostic data recorded by the scan tool or. Battery test allows you getting the voltage of battery with OBD port by the scan tool when the. DTC Library to lookup when user is operating this tool. Multi-language: English, German, Dutch, Spanish, French. Diagnose Single Brand of most Models (OBDII-16DLC) Full System Diagnosis Support Oil Service Reset Electronic Parking Brake (EPB) system maintenance Battery Management System (BMS) Diesel Particulate Filter (DPF) Regeneration Control System.

Electronic Throttle Control System (ETC) Steering Angle Sensor (SAS) Calibration. Read&Clear DTC Read Live Date Support Battery Test Support Data Review and Print Full Speed Upgrade via PC 4.0? TFT LCD, 480320 Pixels Support Multi-Language.

I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer.

This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.

O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle. Turn off Check Engine Light (MIL), clear codes and reset monitors 12. Read live PCM DataStream 13.

Support CAN (Controller Area Network) and all other 14. Multilingual menu and DTC definitions- English, Spanish, and German, etc 15. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.

Works on most of 2001 and later OBDII compliant PETROL European vehicles 20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles 21. Works on most of 1996 and later OBDII compliant US and Asian vehicles 22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.

Comprehensive Help, Including OBD Parameter, Mode Explanations & More. Contents: US V2.0 Main Unit TF card (In the main unit) Main Cable Data Cable User Manual. This item is in the category "Vehicle Parts & Accessories\Automotive Tools & Supplies\Diagnostic Service Tools\Code Readers & Scanners".

The seller is "s_a_m80" and is located in this country: AU. This item can be shipped worldwide.

• Brand: iCarsoft
• Supported System: ABS, BMS, DPF, EPB, SAS, SRS, TPMS
• Accessories: Adapter Cable, Carrying Case, Memory Card, USB Cable, User Guide
• Warranty: 2 Year
• Vehicle Type: Passenger Vehicle
• Manufacturer Part Number: US V2.0
• Connectivity: USB
• Features: Backlit Display, Built-In Battery, Check Engine Light Shut Off, Colour Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
• OBD Interface: EOBD, OBD, OBDII