LAUNCH Check Engine Transmission ABS SRS Code Reader OBD2 Car Diagnostic Scanner. LAUNCH VII+ OBD2 scanner can easily access to the Engine, Transmission, ABS, and SRS to retrieve their DTCs, text or graphic live data stream and other Electronic Control Unit information. Once the detected problems are fixed, you can use this scan tool to clear the DTCs, and then the warning light will be off automatically.
ALL 10 OBD II TEST MODES. Equipped with FULL OBDII functions, this OBD2 scanner is not limited to reading and clearing DTCs, but also supports advanced live data stream for focusing on any suspicious or symptom-specific data parameters, as well as O2 Sensor test and EVAP system test for detecting their faults in time to avoid emission problems. You can use this OBD2 scanner to diagnose a wide range of vehicles even 12V diesel cars.The Full OBD2 Functions can be used for all vehicles compatible with OBDII & CAN protocols, and the Four Systems Diagnoses can be used for 2006 and newer vehicles. This OBD2 scanner features "DTC Lookup" - to retrieve detailed DTC definition in seconds; "Automatic Diagnostic Report" and "Data Playback" - to record the diagnostic information automatically and then you can review the report any time; "PC print" - to help print diagnostic report out after connecting with PC. This OBD2 scanner supports 8 different languages (English, Spanish, French, German, Italian, Russian, Japanese, Portuguese). Notice: The upgrade can be finished with Window-based computer ONLY via the TF card or USB cable. Register code, can be found in "help" application after connecting the tool with PC. What does the LAUNCH Creader VII+ obd2 scanner do for you? If the screen shows Lib files are not exist! , this is because the TF card is not inserted properly, or the connection between the diagnostic cable and the car is unstable. Please take the TF card off, re-download the software, and reinsert the TF card into the tool.
Please don't register the device on LAUNCH official website. At present, all LAUNCH scanners don't need to go to the official website to register, which can be registered on the device or on the update tool. LAUNCH Creader VII+ OBD2 Scanner highlights. Full OBDII Functions: The obd2 scanner features all 10 OBDII test modes, such as I/M Readiness, Live Data Stream (in graphic format), O2 Sensor Test, On-board Monitor Test, etc.User-friendly Design: LAUNCH scan tool VII+ has an ergonomic handheld design with 3.5 TFT display, user-friendly button layout, and a wear-resistant housing, for simplicity and durability. Fast and Intuitive Operations: LAUNCH VII+ OBDII scanner has a fast and intuitive operation through an easy-to-use interface and responsive operating system. Wide Compatibilities: The vehicle code reader is compliant with all the OBDII protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO14230), and CAN (Control Area Network ISO 11898). Multilingual Built-in DTC Lookup: LAUNCH VII+ is equipped with a built-in DTC library combined with multilingual menu, including English, Spanish, French, German, Italian, Russian, Japanese, and Portuguese.
Supports data recording and playing back, Graph, record, and replay data in full color. Provides lifetime free online update service. Send and Prints data via PC. Support 8 languages: English, Spanish, French, German, Italian, Russian, Japanese, Portuguese.
LAUNCH Creader VII+ - Comprehensive ENG, Transmission, ABS, Airbag Diagnostic Scan Tool. POWERFUL functions: Engine/Transmission/ABS/SRS Systems Diagnostics. Compared to other 95% OBD2 scanner in the market, LAUNCH Creader vii+ can also work on Transmission System, while many other Same types of Scanners DOES NOT work on Transmission System. The scan tool LAUNCH creader vii+ can read/erase codes and view live data in the engine system to help you easily determine the cause of the warning light, and troubleshoot the issues, checking the engine real-time operating status, and turning off warning light to make sure the engine works properly.
The OBD2 scanner reads and clears codes and views live data in transmission systems, and helps make adjustment to keep the transmission system's output optimally adapted to the speed and load. Knowing the exact cause of a transmission's woes means you can get it repaired as quickly as possible and at minimal expense to you. For ABS (Anti-lock Braking System). With this code reader, you can access the ABS reading and clearing DTCs and viewing real-time data flow in the system.
It also supports performing various bi-directional tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light. Read and clear fault code in SRS (Airbag) and turn off warning light of airbag for making sure engine work properly and safely. This scan tool allows you to read codes, clear codes, and read live data in Supplementary Restraint System (airbag) to ensure it works fine.
4 in 1 Live Data Stream + 10 OBDII Test Modes. In order to give you a real-time overview of the vehicle's working conditions, the Live Data Stream function will present you with up to four vehicle system information simultaneously about working condition of on-board sensors and parts in the form of a data stream or text. This allows you to visualize the vehicle's performance and to determine where the problem lies.Read and Clear DTCs: Show the detailed description of the Diagnostic Trouble Code (DTC) and clear/reset the diagnostic information. Turn-off Malfunction Indicator Light (MIL). Read I/M Readiness Status: Show whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream: Show the information of continuous data stream from vehicle in live graphic (waveform) display. Read Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test: Show the last results of O2 sensor test in graphic display for troubleshooting. On-Board Monitor Test: Read the results of on-board diagnostic monitoring tests for specific components/systems. Read Vehicle Information: Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. EVAP Test for Fuel Tank System (Carbon canister test). How to Register and Update This Scan Tool?(Tips: Free Update for Life-long time). There are two methods to update the device: Update via TF card (strongly recommended) or update via USB cable.
Step 2: Download and install the Creader VII+ updating tool and launch the program when installed. Note: the "User password" is equal to the Register Code. Step 4: Install the TF card from the tool into the supplied USB TF card adapter and insert into the USB port of the computer.Step 6: Once all steps are complete, reinsert the TF card into the tool and power the tool via USB in computer or via OBD2 port in vehicle. The tool will prompt you to upgrade, select OK button on tool to proceed.
To shorten the distance between you and us and let you have a better user experience, we've 100% localized the interface into 8 languages: English, Spanish, French, German, Italian, Russian, Japanese, and Portuguese. Generate & Print Diagnostic Report.
After running the diagnosis, the LAUNCH Creader VII+ obd2 scanner will automatically save all of the information about the parts working condition, sensor data and freeze frame and you can go through it by viewing the live data stream. If you are confused with result of the diagnostic report, you can share it with your peers, friends or even us for help!
We have prepared an in-built DTC library for you to search the specific definition of DTCs so that it saves you the trouble to copy-past and google it on PC. Screen: 2.4 TFT 320240 dpi.Dimension: 120mm75mm20 mm (4.7" 3.0" 0.8). Otherwise an Unpaid Item case will be opened to you.
We have warehouse in USA, UK, HongKong, Australia, Russian, Germany and China warehouse. Please return the item within 30 days after receiving if you are not happy with your purchasing. We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. Business time: GMT8 (9:00-18:00) from Monday to Friday.