Launch X431 OBD2 Scanner ABS SRS Code Reader Check Engine Car Diagnostic Tool

  

Launch X431 OBD2 Scanner ABS SRS Code Reader Check Engine Car Diagnostic Tool. LAUNCH Creader VII+, as an enhanced scan tool upgraded from basic OBDII/EOBD code readers, is capable of performing complete OBDII diagnostics for most 1996 and newer OBDII-compliant vehicles, and accessing Engine system, Transmission system, ABS, and SRS to troubleshoot and turn off system warning lights for most 2006 and newer domestic and foreign vehicles. The LAUNCH Creader VII+ Scan Tool. LAUNCH scan tool vii+ can read/erase codes, view live data stream and turn off the warning lights in the Engine system, Transmission system, ABS and SRS. The obd2 scanner features all 10 OBDII test modes, such as I/M Readiness, Live Data Stream (in graphic format), O2 Sensor Test, On-board Monitor Test, etc.

LAUNCH scan tool Vii+ has an ergonomic handheld design with 3.5 TFT display, user-friendly button layout, and a wear-resistant housing, for simplicity and durability. LAUNCH VII+ OBDII scanner has a fast and intuitive operation through an easy-to-use interface and responsive operating system. The obd2 scanner is compliant with all the OBDII protocols: J1859-41.6, J1850-10.4, ISO9141, KWP2000 (ISO14230), and CAN (Control Area Network ISO 11898). LAUNCH VII+ is equipped with a built-in DTC library combined with multilingual menu, including English, Spanish, French, German, Italian, Russian, Japanese, and Portuguese. Supports data recording and playing back.

Provides lifetime free online update service. The scan tool LAUNCH creader vii+ can read/erase codes and view live data in the engine system to help you easily determine the cause of the warning light, and troubleshoot the issues, checking the engine real-time operating status, and turning off warning light to make sure the engine works properly. The OBD2 scanner reads and clears codes and views live data in transmission systems, and helps make adjustment to keep the transmission system's output optimally adapted to the speed and load. Knowing the exact cause of a transmission's woes means you can get it repaired as quickly as possible and at minimal expense to you.

For ABS (Anti-lock Braking System). With this code reader, you can access the ABS reading and clearing DTCs and viewing real-time data flow in the system. It also supports performing various bi-directional tests to check the operating conditions of Anti-lock Braking System, and turn off the warning light. Read and clear fault code in SRS (Airbag) and turn off warning light of airbag for making sure engine work properly and safely. This scan tool allows you to read codes, clear codes, and read live data in Supplementary Restraint System (airbag) to ensure it works fine. The LAUNCH obd2 scanner Creader VII+ is an enhanced scan tool specially designed for most 1996 and newer OBDII-compliant vehicles. Compared to basic OBD2 scanner/code readers, it provides complete OBDII diagnostics, including. Show the detailed description of the Diagnostic Trouble Code (DTC) and clear/reset the diagnostic information. Show whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing. Show the information of continuous data stream from vehicle in live graphic (waveform) display.

Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs. Show the last results of O2 sensor test in graphic display for troubleshooting. Read the results of on-board diagnostic monitoring tests for specific components/systems.

Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc. How to Update This Scan Tool? There are two methods to update the device: Update via TF card (strongly recommended) or update via USB cable. Download and install the Creader VII+ Update tool only under Window XP or Windows 7, Windows 8, Windows 10 (recommend updating it by card reader) operating system on our official website (refer to the manual), and launch the program.

Install the TF card from the tool into the supplied USB TF card adapter and insert into the USB port of the computer. Reinsert the memory card into the device and reconnect the device to make sure it's updated successfully.

Screen: 2.4 TFT 320240 dpi. Dimension: 120mm75mm20 mm (4.7" 3.0" 0.8). Otherwise an Unpaid Item case will be opened to you. We have warehouse in USA, UK, HongKong, Australia, Russian, Germany and China warehouse.

12 months free repair for the devices. 3 months for the accessories. If after 30 days, or the item has been used, we have the right to decline your claim. We are specialized dealer of On-Board Diagnostic tools and automotive electronics.

For more than 10 years. We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands. And more brands will be show in our store in near future. Business time: GMT8 (9:00-18:00) from Monday to Friday.