NEXAS NL102 Plus Heavy Duty Truck Diagnostic DPF Regen Oil Reset OBD2 Scanner

  

Full Features of NEXAS NL102 PLUS >>> Deliver a Faster, Smarter, More efficient Diagnostic Scan Tool for truck owner, DIY and Technician! NL102 PLUS truck scanner offers deeper and more complete diagnostic services. And can do better in terms of repair services compared to other truck scanners in a similar range on the market.

After comprehensive testing by NEXAS engineers day and night. NL102 PLUS function has a working range of 95 % to 98%(other diagnostic tools can achieve the function of OE scanner only 34% to 55%). Therefore, it is an essential professional tool for automobile mechanics DIY or truck owner who are engaged in automobile maintenance.

NEXAS NL102 PLUS scanner can diagnose the truck more complete and comprehensive, without the help of any other equipment or consulting the guidance of high-end technicians. Advanced and complete functions, quiet and simple operation process. With the help of the advanced GD processor, the NL102 PLUS truck scanner provides fast and smooth access to each module. You can read code, live data, and clean code within seconds of each individual module. If you choose to scan automatically, the entire system diagnosis can be completed in 20-35 seconds.

Full Heavy Duty Truck System Diagnosis Includes. After-treatment System, ABS System, Instrument panel System, Cab Climatie System, Electronic Parking Brake Reset, Transmission System, Engine System, Professional Battery Test, Suspension System, Drivetrain System, Fuel System etc.

Full EOBD/ OBD2 Modes Diagnosis Includes. Read and Clear DTCs, Live Data Stream Viewing, Freeze Frame Data Viewing, Vehicle Information, Retrieve I/M Readiness Status, On-Board Monitor Test, EVAP System Test, Modules Present. When the diesel particulates of the engine accumulate, it will cause the resistance of the exhaust system to increase, the truck's throttle and acceleration will be 30 to 60 percent lower than normalwhich will greatly limit the power release and engine fuel efficiency.

If you're going to take the truck to a repair shop, you're going to have to pay for expensive repairs, DON'T WORRY!!! The NL102P can help you re-awaken the power of engine via DPF regeneration, DPF reset, ect. The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use.

An oil change is required whenever indicated by the display and according to the recommended maintenance schedule. The oil change light won't turn off on its own, even when the old oil has been drained and fresh oil added.

That's where resetting the oil change light comes in. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a service indicatorbeing turned on, also reset the system. The NL102 PLUS is a Two-in-One code reading and battery detection for truck and car, it can read real-time battery voltage, monitor car battery health status to maintain your battery. Meantime also watches out the battery power situation.

Powerful DPF Regeneration and Oil Light/ Sensor Reset. DPF Support The Following Engines (Products with DPF regeneration performance exceeding all of the market). DOC Cleaning Procedures, DPF Regeneration, DPF Onboard.

DPF Regeneration in Parking, DPF Regeneration in Driving. Aftertreatment Diesel Particulate Filter Regeneration.

One of the highlights of this tool is that you will be able to perform a forced DPF regeneration on your truck for when the DPF light comes on. (as well as saving the time of taking it to a mechanic). NEXAS NL102 PLUS DPF System Regeneration. Regeneration works by raising the exhaust temperature high enough so that the excess soot burns off.

When the filter is clogged with soot, NL102 PLUS can help your truck adjust the corresponding calculation parameters to finish DPF regeneration. This may happen in one of two ways. After the truck has been driving for a long time, The NL102 PLUS can issue commands to make the engine temperature can get high enough for soot to burn off on its own.

Passive regeneration occurs when you maintain a steady highway speed for a period of about 45 minutes. If you do mainly short runs around, you may not be on the road long enough for passive regeneration to kick in. In this case, The NL102 PLUS can help the DPF system will inject excess fuel to raise the exhaust temperature and trigger active regeneration. Oil/Sensor Reset For The Belowing Engines (Products with Oil/Sensor Reset performance exceeding all of the market). EGR Delta Pressure Sensor Recalibration; ATD Maximum Sensor Value Reset.

Modern trucks are equipped with several indicator lights to owners when something needs attention, and the oil change light (also called the maintenance light) is one of them. This light is designed to let you know when the engine oil needs changing, based on the car's odometer reading. The oil change light won't turn off on its own. Unless the light is reset, your vehicle will have no way of telling you the next time an oil change is needed.

Even when the old oil has been drained and fresh oil added. NEXAS NL102 PLUS Heavy Duty Truck Scanner - Thorough Analyzing Deeping Into All Systems and Modules. NL102 PLUS is a unique automotive tool that provides professional diagnosis for truck group and. Supports read fault codes, erase fault codes, read datastream, vehicle information for all truck control module.

It can save you thousands of dollars on car repair services every year. Engine System, Transmission System, Battery Energy System, Wheels System, Diesel Fuel System, Cluster System, DPF Regeneration System, Drivetrain System and more.. Tyre Pressure Control, Braking System, Suspension System, Exhaust System, After-Treatment Control Module System and more.. ABS Bleeding system, Instrument Panel system, Cab Climate Vehicle Management system, Particular system, ESP system, Body Control system and more.. What Makes NEXAS NL102 PLUS Scanner Outstanding?

ABS is one of the most important systems from chassis control modules, If there is something wrong with the ABS system, the tires will be locked, and the steering wheel cannot be turned, when a car takes emergency braking in an emergency situation, which is extremely dangerous for the driver. This code reader will can retrieve the ABS issues timely to ensure your driving safety and reset the ABS light. A well-functioning, always ready, Supplemental Restraint System (instrument panel) is absolutely critical for occupant and driver safety. Even minor issues might impact the operation, and performance, of the instrument panel system. The NL102 PLUS truck scanner quickly, and efficiently, allows the user to retrieve, read and interpret instrument panel issues and monitor system system functionality to rapidly diagnose, and repair, the cause of the issue.

The cab climatie plays an important role during driving, The driver can adjust the proper cab temperature according to the change of seasonal conditions, cab Climatie there may be different shaking and vibration in different road conditions which may cause damage Cab parts. When there is a problem on the cab climate, the NL102 scanner will help you to read the fault codes, show codes definitions and clear the fault codes.

The truck's brakes are bound to wear out during years of long-distance transportation, and the truck owner needs to repair or replace the brake related parts, Reset the new brake pad after repairs in electronic parking brake system are done. Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc. The transmission system is a very important module of power system control module, but some issues like unworking electronic accessories and broken transmission computer will keep your transmission light flashing. It's hard to locate the accurate error within limited time. Fortunately, this transmission scanner will assist you to have a fast scanning of your vehicle and read the fault code easily, shutting down the waring light within minutes when you finish the repair.

The control unit has been designed for exhaust gas after-treatment applications on truck engines for low emissions according to Euro IV, V and VI. The control unit acquires relevant sensor information from the exhaust line and the after-treatment system (temperatures, pressures, mass flows, urea level, emissions) to perform, The sensor values are then utilized to calculate and execute the setpoint values for the relevant operations - and the Diesel Dosin System (DD-S). NEXAS NL102 PLUS truck diagnostic tool support gather real-time battery voltage, analyze information automatically in no time, and display results in HD screen, instead of a direct result on the LCD screen that an ordinary code reader, which will ensure that you can access and analyze the accurate live data and determine the battery's health status or expected remaining life. Make you know your battery status in advance. The suspension system is mainly in order to reduce the impact caused by uneven road surface on the frame to maintain stability and safety on the truck.

While the suspension system is usually very reliable, sometimes it may need to be reset or replaced. Every time you make a maintenance to the suspension system, you need to reset it. This includes replacing any components or sensors, the suspension system needs to be reset in order to relearn the new parts and their positions.

The drivetrain is a series of components that transfers power generated by the engine to the wheels, thus providing the torque for your vehicle to move forward or in reverse. If there's a problem with the truck's drivetrain, the power your engine generates has no way of reaching the wheels. The truck needs to fix the drivetrain problems and reset the drivetrain error code. The function of the diesel fuel system is to inject a precise amount of atomized and pressurized fuel into each engine cylinder at the proper time, Combustion in a diesel engine occurs when this rush of fuel is mixed with hot compressed air. When there is a problem with the fuel system, the power of the truck is affected, so a product like the NL102 PLUS is needed to detect the problem and Reset it.

Your truck Has Been Waiting for a NEXAS NL102 PLUS! Except for auto truck repair shop, here is another choice for you to learn about your truck condition deeply. This tool takes away the autoshop's monopoly on repair work and puts it in your own hands. The perfect scanner for truck owners, is worth every penny, and allows you to read, clear codes from almost all BMW systems and check obd system on other truck makes. NEXAS NL102 PLUS Elite Scanner provides more powerful features than normal scanner tool.

(Diesel Particulate Filter) to restore truck power. Oil light service reset function. Can help you turn off the annoying oil reset light. Reads and clears diagnostic trouble codes (DTCs). Can locate truck problems and help you fix your truck. Read, store and playback live O2 sensor test data. Supports multiple trouble code requests. Most truck products do not support this feature. Function to diagnose the health of the battery, to help you extend the life of the battery. Troubleshooting tips guide technicians to the root of problems faster, saving diagnosis and repair time. Crystal-clear backlit high definition display. Helps you identify accurate diagnostic information. With one plug-in, stand-alone unit with. No need for an additional laptop/ computers to operate. Safely communicates with the on-board computer. Read PCM live data stream, with graphic data Display. Small in size and conveniently fits. In your palm and performs continuous DTC scans. Support : Read/Clear codes and show Live Data on the following ECUs (J1939, J1708 and J1587). Engine, ABS, ESP, EPS, Transmission, Instrument panel, Drivetrain, Braking system, Suspension, Fuel system. Please check your truck user manual to make sure your truck ECU is in compliance with J1939, J1708 and J1587 protocols.

Generally for American HD trucks (Class4-Class8) are from 2006 on. Please enter through "HD OBD" on the menu if your vehicle is Heavy Duty Truck (Class4-Class8 trucks); Please enter through "OBD/EOBD" if your vehcile is car, SUV, Mini-Truck, light super duty or other light duty vehicles. Please let me know your truck information if you are not sure whether this scanner is compatible with your truck or not.

Merge Live Sensors Data in Graph. NEXAS NL102 PLUS shows live truck sensors data in text and graph, which allows you to focus on any suspicious or symptom-specific data parameters, and gives you the "real picture" of what's going on in the truck.

You can view Multiple parameter graphs simultaneously and merge them into one coordinate, and it will be easily seen how they affect each other, provides you with the most comprehensive and functional look at live sensors data. You Shouldn't Have Paid so Much. NL102 PLUS truck diagnostic scan tool provides advanced functions, which usually only be available from truck dealer level scanners or much more expensive professional tools.

In addition, this tool can be used as an ordinary obdii scanner for all brands truck on engine system, to help you turn off the engine light and pass the smog check. Why pay a technician 250-650 dollars to connect a scanner to the OBD2 port when you can do the same troubleshooting by yourself?

The Full EOBD/ OBDII function supports American all car after 1996(Compliant OBDII standard protocol), including SUV, mini van, mini-truck, light super duty or other light duty vehicles. Identifies which section of the emission control system has malfunctioned. [including Stored Codes, Pending Codes, Permanent Codes].

Erasing the Diagnostic Trouble Codes may allow the scan tool to delete the fault codes from the vehicle's on-board computer. Further, the I/M Readiness Monitor Status for all vehicle monitors is reset to Not Ready or Not Complete status. Do not erase the codes before repairs or services have been performed. The View Data function allows viewing of live or real time PID data of vehicle's computer module(s) and display graph data for you. Freeze Frame Data allows the technician to view the vehicle's operating parameters at the moment a DTC (Diagnostic Trouble Code) is detected. Function enables retrieval of Vehicle Identification No. (CVNs) and In-use Performance Tracking on 2000 and newer vehicles that support Mode9. I/M Readiness function is used to check the operations of the Emission System on OBDII compliant vehicles.

OBDII regulations set by the (Society of Automotive Engineers) SAE require vehicles monitors and tests on the oxygen (O2) sensors to identify problems related to fuel efficiency and vehicle emissions. Displays test results for Emission-Related power train components and systems that are and are not continuously monitored. The EVAP test function lets you initiate a leak test for the vehicle's EVAP system.

The OBD2 diagnostic tool does not perform the leak test, but signals to the vehicle's onboard computer to initiate the test. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test. The Modules Present function displays the Module IDs and communication protocols for OBDII Modules in the vehicle. What's in the box.

In transmit for the hot season is coming. Please kindly be patiently wait for your order. This will help your product to be received safely and quickly! And we are not responsible for order's delay or miss because of your incomplete contact information.

2 months for the accessories. For free return and replacement. If item arrive defect or doesn't suitable for your ca. If after 30 days, or the item has been used, we have the right to decline your claim. We have been engaged for many years in the line of automobile diagnosing instruments and our corporation is established for the purpose of trustworthiness.

We have over 4 warehouses that are located in US. We is mainly deals in various types of professional car diagnostics scanners and other car service maintenance tools. Such as OBDII SCANNER, ODO-METER TOOL / KEY PRO-GRAMMER, SMOKE DETECTOR / PROBE CIRCUIT TESTER /BATTERY TESTER..... Suitable for COMMERCIAL VEHICLES / PASSENGER CAR /MOTORCYCLE / ATV / UTV etc. Customer Service Hours: M-F: 9:30AM - 18:00PM BST (Beijing Standard Time).